CustomRCmodels R/C Tank's | home
"Heavy-Metal" Tiger gearboxes
here is another special set of gearboxes I build for my Tiger's....
gearbox re-enforcement's....
all metal gears .......
all ball-bearings.......
to install the "big block"- motors you have to cut a portion of the right gearbox :
before :
after :
you also should make sure that the screw ( red arrow ) is counter-sunk enough ,
that the gear-reductions mount flush to the gearbox
here you see the right gearbox and the "big-block"-motor from the left gearbox:
make sure you bend the motor-connection ( red arrow ) out of the way ,
so it can not shorten out against the gearbox-frame.....
9/2004
2/2005