CustomRCmodels R/C Tank's   |   home
down        previous    next        up
1/16 scale Panther
updated 08-27-2009

as of Febr.2007 Tamiya announced the release of there Panther ,
as an answer to the WeCoHe  Panther kit
fact is that the Tamiya Panther lacks a lot of detailes ,
the WeCoHe Panther is a kit to build a true Museums quality model !

WeCoHe has  worked very hard to produce an outstanding kit for a
1/16 scale full option and battle ready Panther
with much more details as the Tamiya Panther

check out these photos and judge for yourself :








here is the link to how this Panther was build ( with more detailed photos )

Panther G von WeCoHe


( pre-production photo )


   





click on the thumbnails to see the full size photos :







check out the assembly-reports posted on European forums :

even if you can't read it , the photos are good !

Panther G von WeCoHe

Panther G von WeCoHe

Project Panther G. is klaar!

Baubericht WeCoHe Panther


this one here is written in English , by one of my ACE club members Jake :

WeCoHe_Panther_Construction_PART1_till_PART8

and here the assemble manual , a work of art by itself:

WeCoHe_Panther_instructions_03_draft



first Panther kit revealed !
check out these photos below ,
these parts are as good as the original WeCoHe photos promise !






here are the pricing's :

please inquire on the actual pricing's  ,
because of the ongoing  up and down of the Euro to the US $ ,
I have not updated it anymore ....
at the moment it would be about 15% more as listed below
( 8/2009 )

basic 1/16 scale Panther R/C model kit for full option functions

you have to use the tracks , road-wheels , drive-sprockets from a Tiger 1 kit ..
which doesn't look bad at all , check out my previously build Panther-illusion ,
which uses Tiger tracks and wheels ...
of course you always have the option to upgrade to the fully detailed Panther ,
by purchasing the below listed upgrade parts

Basic kit PG001: $ 797.-

PG001 Basic Early Panther G kit,
Includes all parts necessary to build Panther G 1/16,
Requires Tamiya Tiger I full option for electronics and and other parts.
Does not include tracks, drive sprockets, and idlers, suspension upgrade, recoil upgrade,
road wheels, and other items included in Full UP Kit. Includes Early Exhaust P 20


Basic kit PG002: $ 789.-

PG002  Basic Kit Panther G Mid.
Includes necessary parts to build one 1/16 scale Mid-production Panther G.
Requires Tamiya Full Option Tiger I kit for electronics, drive system, and other parts.
Does not include tracks, drive sprockets, idlers, suspension upgrade, recoil upgrade,
road wheels, and some other items included in Full Up Kit.Includes Early Exhaust P 21


Basic kit PG003: $ 817.-

PG003  Basic Kit Panther G Late.
Includes parts necessary to build one Panther G Late Production kit.
Requires Tamiya Full Option Tiger I kit for electronics, drive systems, and other parts.
Does not include tracks, drive sprockets, idlers, suspension upgrade, recoil upgrade,
road wheels, and some other items included in Full Up Kit.Includes Early Exhaust P 22



Attention : I need to update this section below , because of new part-numbers :

each base kit includes the following parts:

P1 Basic poly sheets 6 times
P2 Screw set upper hull
P3 Set of hatches, MG parts, Service hatch
P4 Lower hull
P5 Suspension holder
P6 Laser cut distance sheet
P7Holder upper hull
P10 Gunshield (mantlet)
P11 Turret Complete
P12 Gun barrel complete


 Options/upgrades from the base-kit  to build a fully scale Panther, full function
( you still need to buy a Tamiya Tiger I full function kit for misc parts and electronics )
P  8 Idler arms and axels                                                32.00
    P  9 Auxiliary Transmission housing left and right    45.00
   P 14 Scale road wheels and axels                              253.00
P 15 Screws outside ring                                             92.00
P 16 Screws inside wheel                                             39.00
P 17 Road wheel caps                                                   72.00
P 18 Sprockets, idlers, and tracks                            345.00
P 19 Gun barrel travel lock                                           67.00
P 23 Crew heater                                                            55.00
P 24 Jack                                             
  P 25 Bosch head light and cable I piece                      24.00
P 26 Set four Panther tow shackles                            23.00
 P 27 Suspension upgrade                                           131.00
P 28 Recoil upgrade                                                       82.00



fully scale and detailed 1/16 scale Panther R/C model kit for full option functions

Complied kit PG004: $ 1830.-

PG004 Panther G Early Production Full Up Kit.
Includes the following PTH part numbers:
0001, 0003, 0004, 0005, 0006, 0007, 0008, 0009, 0010, 0012, 0013, 0014, 0015, 0020, 0021, 0022, 0023.
Requires Tamiya Full Option Tiger I kit for electronics, drive systems, and some other parts.
Tamiya Tiger I Full Option kit not included in price.


Complied kit PG005: $ 1825.-

PG005 Panther G Full Up Kit, Mid Production Version.
Includes parts necessary to build 1 Panther G Mid Production Kit.
Same as PG004, Except does not include PTH0015, does include PTH0016 mid exhaust system.
Requires Tamiya Full Option Tiger I for electronics, drive systems, and other parts.
Tamiya Full Option Tiger I kit not included.


Complied kit PG006: $ 1895.-

PG006 Panther G Late Production Full Up Kit.
Includes necessary parts to build one Panther G 1/16 scale late production kit.
Same as PG004 Kit, does not include early or mid exhaust,
includes late exhaust PTH0017 and Battle Room Heater PTH0018.
Requires Tamiya Full Option Tiger I kit for electronics and drive systems and other parts.
Tiger I Full Option Kit not included in price.


this Panther kit is designed
to be used with the stock Tamiya Tiger 1 ( or King Tiger ) gearboxes
which should bring it up to about scale-speed ...
if you want more torque I would recommend the WeCoHe transmission upgrade kit :

the other option are the use of 8 tooth motor-pinions with high-rpm 380/400/480 type motors ...

more about motor and gear-box-option as soon I have build up a test-chassis of this Panther ...


if you are interested in this fantastic model-kit
pop me an email




July 2007
update 8/2009

Willy
CustomRCmodels